吊索具连接方式的正确使用方法
Correct use of the connection mode of the sling
吊装时，正确地使用吊索具连接方式：吊索具在安全方式下正确的安置、连接负载，必须安放吊索具在负载上，以便负载能够均衡的作用吊索的宽度；始终不能打结或扭曲吊索；缝合部位不能放置在吊钩或起重设备上；并且总是放在吊索的直立部分；通过远离负载、吊钩和锁紧角度来防止标签的损伤。
When hoisting, the correct use of the sling connection method: the sling is correctly placed and connected to the load in a safe way, and the sling must be placed on the load so that the load can balance the width of the sling; Never knot or twist the sling; The suture part cannot be placed on the hook or lifting equipment; And always placed on the upright part of the sling; Protect the label from damage by keeping away from the load, hook and locking angle.
多重组合吊索具的使用注意事项：多重组合吊索的极限工作力的评估，决定于组合吊索承受负载的对称性，也就是当起吊时，吊索的分支按设计分布对称均匀，具有同样垂直角度。组合吊索具，假如分支不能按设计均匀的受力，最大的强力在一个分支上，那将是设计角度临近分支最大承受力的总和，同样的结果在四组合吊索中，如果不是刚性负载，将同样计算在内。
Precautions for the use of multiple combined slings: the evaluation of the ultimate working force of multiple combined slings depends on the symmetry of the load borne by the combined slings, that is, when lifting, the branches of the slings are symmetrically and evenly distributed according to the design, with the same vertical angle. If the branch of the combined sling can not be uniformly stressed according to the design, and the maximum strength is on a branch, it will be the sum of the maximum bearing capacity of the branch near the design angle. The same result will be included in the four combined slings if it is not a rigid load.